网站转让 → 您的公司名称

在高温情况下使用不锈钢网带时还需考虑以下问题
The following problems should be considered when using stainless steel mesh belt under high temperature
a)网带在工作中由于摩擦所产生的热量。
a) The heat produced by the friction of the mesh belt in operation.
b)由于制造工艺不同导致不锈钢网带的热膨胀系数的不同，当不同的材料焊接在一起时，有出现热疲劳的可能性。
b) Due to different manufacturing processes, the thermal expansion coefficient of stainless steel mesh belt is different. When different materials are welded together, there is the possibility of thermal fatigue.
c)当环境温度超过400℃时零件之间的膨胀造成间歇减小的情况也应该充分考虑。
c) When the ambient temperature is over 400 ℃, the intermittent reduction caused by the expansion between parts should also be fully considered.
d)蠕变。
D) creep.
e)普通网带在高温下工作有热脆性，不锈钢网带亦然。
e) The common mesh belt has hot brittleness when working at high temperature, so does the stainless steel mesh belt.
f)碳析出的脆性;
f) Brittleness of carbon precipitation;
g)温度变化对不锈钢网带使用的影响(冷却和膨胀);
g) The effect of temperature change on the use of stainless steel mesh belt (cooling and expansion);
h)高温环境对润滑的影响，硅、石墨和二硫化钼润滑油均有良好的抗热性。
h) Silicon, graphite and molybdenum disulfide lubricants have good heat resistance.
二、当网带被暴露在含有腐蚀性物料中会造成不良后果。首先网带零件会变的越来越细，导致磨损加速，普通网带零件上的铁锈也会影响不锈钢网带铰链和滚子的灵活转动。当不锈钢网带在酸性或碱性的环境下持续工作时，零件会出现应力腐蚀和晶力腐蚀。
2、 When the mesh belt is exposed to corrosive materials, it will cause adverse consequences. First of all, the mesh belt parts will become more and more thin, resulting in accelerated wear. The rust on the common mesh belt parts will also affect the flexible rotation of stainless steel mesh belt hinge and roller. When stainless steel mesh belt works continuously in acid or alkaline environment, stress corrosion and crystal stress corrosion will appear on parts.
在腐蚀性的环境下使用网带时，必须要非常重视网带零件材料的选择。用马氏体不锈钢系列作零件的网带是否会生铁锈还要视具体的工作环境而定。掌握防腐蚀技术在腐蚀性环境下正确使用网带是非常有用的。
When using mesh belt in corrosive environment, we must attach great importance to the selection of mesh belt parts materials. Whether the mesh belt with martensitic stainless steel series as parts will rust depends on the specific working environment. It is very useful to master the anti-corrosion technology and correctly use the mesh belt in corrosive environment.
三、在研磨环境下使用网带
3、 Use mesh belt in grinding environment
在研磨环境下使用网带，会导致磨损特别严重，为了保证网带的使用寿命，使用的时候必须要注意:
When using the mesh belt in the grinding environment, it will cause serious wear. In order to ensure the service life of the mesh belt, attention must be paid to:
a)可以通过安装链罩的办法避免网带直接暴露在研磨性的物料中;
a) The net belt can be prevented from being exposed to abrasive materials by installing chain cover;
b)当网带暴露在研磨物料中的时候一定要选择合适的输送机型式;
b) When the mesh belt is exposed to abrasive materials, it is necessary to select the appropriate conveyor type;